Development and Investigation of Nitrate Phase Change Filler Material for Solar Process Heating Applications

N. Pradeep; K.S. Reddy

doi:10.52825/solarpaces.v2i.917

Authors

N. Pradeep Indian Institute of Technology Madras https://orcid.org/0000-0002-6971-7910
K.S. Reddy Indian Institute of Technology Madras

DOI:

https://doi.org/10.52825/solarpaces.v2i.917

Keywords:

Solar Thermal Energy, Thermocline Thermal Energy Storage System, Phase Change Phenomena, Solar Salt, Process Heating Applications

Abstract

Thermocline thermal energy storage system is an imperial system for solar process heating applications. The thermal energy storage system comprises filler material and heat transfer fluid. In the present study, the commercial phase change material (PCM) (filler material) solar salt (60%NaNO₃+40%KNO₃) is synthesized, and it is encapsulated with a 1mm thickness of stainless steel 316L encapsulation with the macro-size of 60mm; the encapsulated PCMs is considered as a single particle in the thermocline thermal energy storage system. The performance of the single encapsulated PCM is studied with a constant heat transfer fluid (Therminol-VP1) flow rate of 0.00015 kg/s during the charging process. The specific heat of the solar salt is measured in Differential Scanning Calorimeter (DSC) in the solid phase is found as 1.381 J/gK, and liquid phase is identified as 1.551 J/g-K, the enthalpy during the phase change process is found as 116.72 J/g. As well, the thermal conductivity of the solar salt is measured in Transient Heat Conduction method, and the thermal conductivity follows the linear relationship of -0.0025(T)+0.4023 (45ºC<T<100ºC) in the sensible region. The temperature variations and the phase change phenomena for the solar salt is identified and the contours are provided. The charging time for the encapsulated solar salt is identified as ~138 minutes. The energy storage cost for the single filler material (Solar Salt + SS316L encapsulation) is identified as Rs.5.93/- (USD 0.071) for the period of charging duration.

Downloads

Download data is not yet available.

References

K. S. Reddy, V. Jawahar, S. Sivakumar, and T. K. Mallick, “Performance investigation of single-tank thermocline storage systems for CSP plants,” Sol. Energy, vol. 144, pp. 740–749, 2017, doi: https://doi.org/10.1016/j.solener.2017.02.012.

N. Pradeep and K. S. Reddy, “Performance enhancement of packed bed thermal energy storage system for solar cogeneration of power and potable water production,” J. Clean. Prod., vol. 404, p. 136754, 2023, doi: https://doi.org/10.1016/j.jclepro.2023.136754.

N. Pradeep and K. S. Reddy, “Design and investigation of solar cogeneration system with packed bed thermal energy storage for ceramic industry,” Renew. Energy, vol. 192, pp. 243–263, 2022, doi: https://doi.org/10.1016/j.renene.2022.04.087.

N. Pradeep and K. S. Reddy, “Development of an effective algorithm for selection of PCM based filler material for thermocline thermal energy storage system,” Sol. Energy, vol. 236, pp. 666–686, 2022, doi: https://doi.org/10.1016/j.solener.2022.02.044.

K. S. Reddy and N. Pradeep, “Stability analysis of the thermocline thermal energy storage system during high flow rates for solar process heating applications,” Sol. Energy, vol. 226, pp. 40–53, 2021, doi: https://doi.org/10.1016/j.solener.2021.08.026.

Z. Lipnicki, T. Małolepszy, M. Gortych, and P. Grabas, “Simple analitycal and experimental method of solidification PCM material inside a spherical capsule,” Int. Commun. Heat Mass Transf., vol. 135, p. 106083, 2022, doi: https://doi.org/10.1016/j.icheatmasstransfer.2022.106083.

E. Assis, G. Ziskind, and R. Letan, “Numerical and Experimental Study of Solidification in a Spherical Shell,” J. Heat Transfer, vol. 131, no. 2, p. 24502, 2008, doi: https://doi.org/10.1115/1.2993543.

J. M. Khodadadi and Y. Zhang, “Effects of buoyancy-driven convection on melting within spherical containers,” Int. J. Heat Mass Transf., vol. 44, pp. 1605–1618, 2001.

B. D’Aguanno, M. Karthik, A. N. Grace, and A. Floris, “Thermostatic properties of nitrate molten salts and their solar and eutectic mixtures,” Sci. Rep., vol. 8, no. 1, p. 10485, 2018, doi: https://doi.org/10.1038/s41598-018-28641-1.

C-Therm Technologies Ltd, C-THERM TRIDENT, C-Therm (2022) 1–5. https://ctherm.com/thermal-conductivity-instruments/trident/.

S. Jayachandran and K. S. Reddy, “Estimation of Out-of-Plane Effective Thermal Conductivity of Wire Mesh Using 3D Unit-Cell Model Incorporating Secondary Effects,” J. Therm. Sci. Eng. Appl., vol. 15, no. 4, p. 41008, 2023, doi: https://doi.org/10.1115/1.4056773.

A. D. Brent, V. R. Voller, and K. J. Reid, “ENTHALPY-POROSITY TECHNIQUE FOR MODELING CONVECTION-DIFFUSION PHASE CHANGE: APPLICATION TO THE MELTING OF A PURE METAL,” Numer. Heat Transf., vol. 13, no. 3, pp. 297–318, 1988, doi: https://doi.org/10.1080/10407788808913615.