On The Potential Use of Copper-Modified Geopolymer Incorporating Lead-Smelter Slag for Thermal Energy Storage

Nghia Tran; Tuan Nguyen; Tuan Ngo

doi:10.52825/solarpaces.v2i.819

Authors

Nghia Tran Building 4.0 CRC https://orcid.org/0000-0002-4654-0403
Tuan Nguyen University of Melbourne https://orcid.org/0000-0003-0415-4798
Tuan Ngo Building 4.0 CRC

DOI:

https://doi.org/10.52825/solarpaces.v2i.819

Keywords:

Alkali-Activated Materials, Copper, Lead-Smelter Slag, Thermal Energy Storage

Abstract

Thermal energy storage (TES) system has been widely employed in concentrated solar power (CSP) plants to ensure the system efficiency. With excellent thermal characteristics, electrolytic copper powder (ECP), graphene oxide (GO) and lead-smelter slag (LSS) aggregate – a mining waste material, have been utilised in this study, aiming to fabricate metallurgical geopolymer material as a storage medium in the TES system. This paper investigated the effect of ECP contents (0, 5%, 10%, 15%, 20%) on the strength, specific heat, thermal conductivity and thermal stability of GO-engineered geopolymer mixes incorporating LSS aggregate. With 10% ECP inclusion, the flow rate and compressive strength improved significantly. Increasing ECP content improved the thermal conductivity but reduce specific heat of geopolymers. The results revealed that ECP was a promising component to be incorporated into geopolymer to enhance its physio-mechanical characteristics and thermal stability. The combination of ECP, GO and LSS to produce geopolymer materials for TES system can provide an eco-friendly solution to the CSP plants and the industry waste recovery.

Downloads

Download data is not yet available.

References

Henze, V. Energy Storage Investments Boom As Battery Costs Halve in the Next Decade. 2019.

International Energy Agency (IEA), World Energy Outlook 2022. 2022.

Arbaz, M. and E. Prasad, Global Thermal Energy Storage Market - Opportunity Analysis and Industry Forecast, 2020-2030. 2022: United States.

Enescu, D., et al., Thermal Energy Storage for Grid Applications: Current Status and Emerging Trends. Energies, 2020. 13(2): p. 340.

Dunn, R., P. Hearps, and M. Wright, Molten-Salt Power Towers: Newly Commercial Concentrating Solar Storage. Proceedings of the IEEE, 2012. 100: p. 504-515.

Rahjoo, M., et al., Thermal Energy Storage (TES) Prototype Based on Geopolymer Concrete for High-Temperature Applications. Materials (Basel), 2022. 15(20).

Laing, D., et al., Solid media thermal storage for parabolic trough power plants. Solar Energy, 2006. 80(10): p. 1283-1289.

Hoivik, N., et al., Long-term performance results of concrete-based modular thermal energy storage system. Journal of Energy Storage, 2019. 24: p. 100735.

Laing, D., et al., High-Temperature Solid-Media Thermal Energy Storage for Solar Thermal Power Plants. Proceedings of the IEEE, 2012. 100(2): p. 516-524.

Vigneshwaran, K., et al., Concrete based high temperature thermal energy storage system: Experimental and numerical studies. Energy Conversion and Management, 2019. 198: p. 111905.

Tran, N.P., et al., Comprehensive review on sustainable fiber reinforced concrete incorporating recycled textile waste. Journal of Sustainable Cement-Based Materials, 2022. 11(1): p. 28-42.

Tran, N.P., et al., Utilization of Recycled Fabric-Waste Fibers in Cementitious Composite. Journal of Materials in Civil Engineering, 2023. 35(1): p. 04022372.

Tran, N.P., et al., Repurposing of blended fabric waste for sustainable cement-based composite: Mechanical and microstructural performance. Construction and Building Materials, 2023. 362: p. 129785.

Tran, N.P., et al., Microstructural characterisation of cementitious composite incorporating polymeric fibre: A comprehensive review. Construction and Building Materials, 2022. 335: p. 127497.

Tran, N.P., T.N. Nguyen, and T.D. Ngo, The role of organic polymer modifiers in cementitious systems towards durable and resilient infrastructures: A systematic review. Construction and Building Materials, 2022. 360: p. 129562.

Tran, N.P., et al., Strategic progress in foam stabilisation towards high-performance foam concrete for building sustainability: A state-of-the-art review. Journal of Cleaner Production, 2022. 375: p. 133939.

Tran, N.P., et al., High-temperature stability of ambient-cured one-part alkali-activated materials incorporating graphene nanoplatelets for thermal energy storage. Developments in the Built Environment, 2024. 18: p. 100447.

Ortega-Fernández, I., et al., Experimental validation of steel slag as thermal energy storage material in a 400 kWht prototype. AIP Conference Proceedings, 2019. 2126(1).

Wang, J. and Y. Huang, Exploration of steel slag for thermal energy storage and enhancement by Na2CO3 modification. Journal of Cleaner Production, 2023. 395: p. 136289.

Ortega-Fernández, I., et al., Thermophysical characterization of a by-product from the steel industry to be used as a sustainable and low-cost thermal energy storage material. Energy, 2015. 89: p. 601-609.

Boquera, L., et al., Thermo-mechanical stability of concrete containing steel slag as aggregate after high temperature thermal cycles. Solar Energy, 2022. 239: p. 59-73.

Vu Hong Son, P., et al., Steel slag aggregate low-cement concrete: Engineering performance, microstructure and sustainability. Construction and Building Materials, 2024. 436: p. 136827.

Krüger, M., J. Haunstetter, and S. Zunft, Slag as an inventory material for heat storage in a concentrated solar tower power plant: Final project results of experimental studies on design and performance of the thermal energy storage. AIP Conference Proceedings, 2020. 2303(1).

Pan, D.a., et al., A review on lead slag generation, characteristics, and utilization. Resources, Conservation and Recycling, 2019. 146: p. 140-155.

Tran, N.P., et al., A critical review on drying shrinkage mitigation strategies in cement-based materials. Journal of Building Engineering, 2021. 38: p. 102210.

Tran, N.P., et al., Upcycled Polypropylene and Polytrimethylene Terephthalate Carpet Waste in Reinforcing Cementitious Composites. ACI Materials Journal, 2022. 119(4).