Characterization of Electrically Conductive Adhesives to Enable Perovskite-Silicon Tandem Solar Cell Interconnection
DOI:
https://doi.org/10.52825/siliconpv.v2i.1407Keywords:
Electrically Conductive Adhesive (ECA), Perovskite-Silicon-Tandem Solar Cells, Low-Temperature CuringAbstract
The mechanical stability of interconnections in solar modules is crucial for their long-term performance. Electrically conductive adhesives (ECAs) offer a promising solution for the interconnection of perovskite-silicon tandem (PVST) solar cells due to their low-temperature processibility. In this study, the influence of low curing temperatures on the mechanical and electrical properties of ECAs was investigated to assess their suitability for PVST technology. Four commercially available ECAs were characterized, focusing on curing temperatures of 100 °C, 140 °C, and 180 °C. Mechanical characterization through tensile tests and dynamic mechanical analysis (DMA) revealed varying Young’s modulus (E) (stiffness) and glass transition temperatures (TG) among the ECAs. Electrical characterization showed that lower curing temperatures generally led to lower volume resistivity, particularly for ECA C. However, joint resistance values exhibited high standard deviations. Void analysis indicated that void formation had a negligible effect on the mechanical properties of ECAs. Furthermore, the influence of curing degree on mechanical and electrical properties was investigated, highlighting the importance of complete curing for achieving desired properties. Overall, this study provides valuable insights into optimizing the interconnection process for PVST solar cells, essential for enhancing the long-term stability and performance of solar modules
Downloads
References
[1] M. De Bastiani et al., “All Set for Efficient and Reliable Perovskite/Silicon Tandem Photovoltaic Modules?”, Solar RRL, vol. 6, no. 3, 2022, doi: https://doi.org/10.1002/solr.202100493
[2] A. De Rose et al., “Low-temperature metallization & interconnection for silicon heterojunction and perovskite silicon tandem solar cells”, SOLMAT, vol. 261, 2023, doi: https://doi.org/10.1016/j.solmat.2023.112515
[3] M. Pander, S. Schulze, and M. Ebert, “Mechanical Modelling of Electrically Conductive Adhesives for Photovoltaic Applications”, EU PVSEC Proceedings, pp. 3399–3405, 2014, doi: https://doi.org/10.4229/EUPVSEC20142014-5DV.3.39
[4] M. I. Devoto et al., “Measuring the Contact Resistivity of ECA-Based Joints”, EUPVSEC Proceedings, pp. 1001–1008, 2020, doi: https://doi.org/10.4229/EUPVSEC20202020-4AV.1.26
[5] V. Nikitina, et al., “High-Speed characterization of electrically conductive adhesives for industrial SHJ solar cell interconnection”, in Metallization and Interconnection Workshop Proceedings, 2022, doi: https://doi.org/10.1063/5.0127583
[6] N. Abdel Latif et al., “Characterization of Mechanical Strength of Shingle Joints Using Die Shear,” in SiliconPV Proceedings”, doi: https://doi.org/10.52825/siliconpv.v1i.944
[7] G. Beaucarne, “Materials Challenge for Shingled Cells Interconnection”, Energy Procedia, vol. 98, pp. 115-124, doi: https://doi.org/10.1016/j.egypro.2016.10.087
[8] A. Dhouib and S. Filali, “Operating Temperatures of Photovoltaic Modules”, in Energy and the Environment, Oxford, England: Pergamon, 1990, pp. 494-498, doi: https://doi.org/10.1016/B978-0-08-037539-7.50085-5
[9] J. Shen et at., “A Multiresolution Transformation Rule of Material Defects”, Int. J. Damage Mech., vol. 18, no. 8, pp. 739-758, 2009, doi: https://doi.org/10.1177/1056789509346693
[10] E. Koos and N. Willenbacher, “Capillary Forces in Suspension Rheology”, Science, vol. 331, issue 6019, pp. 897-900, doi: https://doi.org/10.1126/science.1199243
Published
How to Cite
Conference Proceedings Volume
Section
License
Copyright (c) 2024 Leonhard Böck, Torsten Rößler
This work is licensed under a Creative Commons Attribution 4.0 International License.
Accepted 2024-07-26
Published 2025-01-09
Funding data
-
Bundesministerium für Wirtschaft und Klimaschutz
Grant numbers 03EE1140B
